Recently have you noticed that your power tool’s drill bits aren’t entranced exactly the way they used to?
Also, there could be a few bits that aren’t what they used to be, so they cannot correctly work with softwoods or metals any longer.
However, even if the faces don’t move from underneath their blankets, there will still be a dust cloud cluttering up your entire room. The high squeaking will also accompany your purchase. How do you manage that?
Now, most will advise you to get a new drill bit box. However, if you perform a simple procedure, you can sharpen a drill bit. How do you perform this technique? For instance, I m going to reveal it.
What is a Drill Bit?
A drill bit is a small, sharp tool used to create holes in materials. Drill bits come in a variety of shapes and sizes, and can be made from a variety of materials, including metals, plastics, and wood. Drill bits are typically inserted into a drill machine to create the holes required for various tasks.
What is The Purpose of a Drill Bit?
A drill bit is used to create a hole in objects, typically wood, plastic, and metal. The purpose of a drill bit depends on the type of bit that is used.
For example, a hole-saw bit is used to cut through wood, while a pilot hole bit is used to start a hole in metal. They can also be used to cut through other materials such as foam and sheet metal.
Why Should You Sharpen Drill Bit?
There are many reasons why you should sharpen your drill bit. A dull bit can cause problems when drilling into materials, such as wood or plastic.
It can also be more difficult to drill through hard materials. Sharpening your bit regularly will keep your drilling efforts smooth and efficient.
A properly sharpened drill bit is key to ensuring that the hole is created accurately, leading to fewer delays and less potential for damage. A sharp drill bit will help you generate more power when drilling.
A properly sharpened drill bit will stay sharper longer and prevent damage to your drill bits or the materials you’re drilling into. Finally, a well-sharpened bit can make your drilling process much easier and less time-consuming.
How To Sharpen Drill Bits | Methods of sharpening Drill Bits
There are many ways to sharpen a drill bit. The most common methods are using a knife, file, grinding stone, or electrician’s file. Each method has its own advantages and disadvantages.
Sharpening With Knife
The most common way to sharpen a drill bit is to use a knife. This is the simplest method and is the easiest to learn. You can use any type of knife, including a kitchen knife or an outdoor camping knife. Simply hold the drill bit between your thumb and first two fingers and use the tip of the blade to sharpen it.
Sharpening With File
File sharpening is another common method for drilling bits. To do this, you need to have a file that matches the size of your drill bit.
Use Grinding Stone
File sharpening can be done on a bench grinder or using an electrician’s file (a specialty tool used for filing). This is the most time-consuming method, but it is also the quickest.
Use Electrician File
You can use an electrician’s file to sharpen your bit by holding the drill in one hand and using the other hand to guide it along the file.
There are several types of files that can be used. Some file sharpeners have two different types of files in one device, such as a coarse grinder file and a fine file.
The harder the surface of the file, the finer it will be able to cut material.
You can also sharpen your drill bit using a ceramic or diamond stone. These are specialty bits used to sharpen metal cutting tools, but they can be used to sharpen drill bits as well.
How To Sharpen Drill Bits With A File?
It is essential to figure out the legal detail of the drill bit body before going to the process.
Keep in mind that depending on the drill bit structure, focusing on which part is key and what kind of engagement is dangerous.
So, let’s get started!
Teeth, land, and edge make up the basic components of a drill bit. Only the edge cuts into the material during the drilling process.
These are most commonly termed “facing” as well, as they penetrate a surface with the hole that forms as a result of the cut.
There is likely to be some dirt or dust on the drill bit. Your first task will be to clean the disposal area and get rid of any dirt or grime. Use a damp rag to clean the dirt away.
It’s time to firmly hold your drill bit. Put some clamp over the table and attach the bit to the table. You can place your hands over the clamp to hold it.
However, this hand-hold method can be somewhat uncomfortable while sharpening. So, I prefer the clamp-table technique.
Take the file you selected for this task and take hold of it on one side to make a 60-degree angle, utilizing the tip of the drill bit.
There is a lip usually for each. Use a V- the Bills file for a spade drill bit. For an anchor point bit, use an auger file.
It’s now time to run the file against the drill bit within lips. Do this approximately six times. You need to run the file in the same manner within lips as you did within throttle.
Make sure you use swirling motions when running the file against the surface.
It is imperative to wash all the parts you have sharpened to eliminate the burrs and complete edges.
You can begin by getting rid of burrs in the areas you sharpened and drawing a file around the area.
By doing this, you will prevent the burrs from getting on your skin and your drill bits from any accidents.
Some people clear the drill bit with running water. However, you can use a drop of machine oil to eliminate metal burrs.
When To Use A File To Sharpen Drill Bits: Pros and Cons
When to use a file to sharpen drill bits can be a daunting question for the beginner. There are pros and cons to both methods, so it is important to know the difference before making a decision.
Files work best when the bit is slightly out of round. If the bit is completely round, then a file will not sharpen it correctly and may even cause damage.
Files can also be used on straight edges, but they are not as effective because they do not grip the blade as well.
Sharpeners with diamond blades usually use files because they offer more precision and control over how deep the cut is made.
Files can be used if you are working with a damaged or dull drill bit. A file will give you an even, smooth edge so the drill bit will not become any more damaged.
Final Words
Hopefully, the information that I provided was of interest to you. Anytime you are confronted with a dull and damaged bit, don’t freak out and take a look at it.
Sometimes it is a bad idea to work with a tool that is lifeless. Take care that you do only what’s best for your job, and become a professional someday.
So, for the sake of your learning, working, and benefit, take into consideration this time-honored technique of filing. And you will soon see the effect of getting things done properly with sharpened drill bits. Good luck!